Skip to content

How to get Free SSL (HTTPS) on InfinityFree

If you're using free hosting with your own domain or a subdomain, you'll want to make this website work over HTTPS (SSL). Fortunately, InfinityFree provides all the tools you need to make it so.

This guide uses the control panel functions and the Free SSL Certificates tool provided by InfinityFree to get SSL up and running on your site.

Step 1: Set up the domain on your hosting account

The first thing to do is to set up the domain name on your hosting account. When you create a new hosting account, you've already set up your first domain name. You can also add and remove domain names later on through the Subdomains, Addon Domains and Parked Domains section of the control panel.

This guide assumes you're using our nameservers for your domain. This is the recommended setting and is easiest to set up. If you're using a free subdomain, this is always the case.

Step 2: Add the domain to the Free SSL Certificates tool

The second thing to do is to add the domain to the Free SSL Certificates too.

To do so, you can follow these steps:

  1. Login to the client area at
  2. Go to the "Free SSL Certificates" page.
  3. Click "Add SSL Domain".
  4. Enter your domain name in the domain name field.
    • A domain name looks like or Do not include any URL prefix like http://.
    • Do not include the www subdomain in the domain. Your SSL certificate will be valid for both the base domain and the www subdomain.
  5. Choose the SSL provider you want to use.
  6. Click Add SSL Domain.

Step 3: Create the SSL certificate order and setup CNAME records

These steps vary depending on whether you are using Let's Encrypt or GoGetSSL to issue the SSL certificates.

With GoGetSSL, you first need to create the certificate order and then setup the CNAME records.

With Let's Encrypt, you first need to setup the CNAME records and then create the certificate order.

Step 3a: Setup CNAME records

To get your SSL certificate, you will need to setup some DNS records to prove to the certificate provider that you own the domain name.

In short, you'll need to setup some DNS CNAME records on your domain name. The records you need to add are shown either on the SSL domain page (for Let's Encrypt) or on the SSL certificate order page (for GoGetSSL).

If you're using our nameservers (or are using a free subdomain), you can add it through the CNAME Records section in the control panel of your hosting account.

If you re using third party nameservers (like Cloudflare), you'll need to setup the CNAME records at that DNS provider.

For more detailed instructions, please see the dedicated article about how to create CNAME records for free SSL.

Please note that it can take a few hours for the status checks to recognize the new SSL certificates.

Step 3b: Create SSL certificate order

After creating the SSL domain (for GoGetSSL) or after setting up the CNAME records (for Let's Encrypt), you can create the SSL order.

To do so, simply click the "Request SSL Certificate" button from the SSL domain page.

If you're using Let's Encrypt, the SSL certificate should be ready in a few minutes.

If you're using GoGetSSL, you'll need to setup the CNAME records as shown on that page. After that, your SSL certificate will be ready in about half an hour.

Do not remove the CNAME records until the certificate is no longer pending. The CNAME records must be present during the entire validation process or it will most likely fail. Only after the certificate has been issued (or failed to be issued) can you safely delete the CNAME record.

Step 4: Install the SSL certificate

After acquiring your SSL certificate, it's time to install it on your hosting account.

In short, you'll need to copy the Private Key and Certificate and upload them to the SSL/TLS section in the control panel (in that order).

For detailed instructions please see the dedicated section about it in how to install an SSL Certificate

Step 5: Verify your website works with HTTPS

After installing your certificate, it's time to see if it worked! To do so, simply enter https:// (your domain).

If you don't see an error page with SSL related warnings, then the certificate installation was successful. Note that you may still see Mixed Content warnings or be redirected to the non-HTTPS version of your site.

Step 5: Configure your website to use HTTPS

After installing the SSL certificate, it's time to make your website use HTTPS.

In short, this involves two steps:

  • Configuring your website to use HTTPS URLs everywhere.
  • Setting up a redirect to ensure all visitors use HTTPS.

The first step entirely depends on how you've built your website, so there are no generic instructions. For the second one, you have a couple of options, all described in the how to force all traffic to HTTPS article.

If you use WordPress, for example, you can do this by manually updating the Website URL through the WordPress admin area and setting up .htaccess rules. Alternatively, you can let the Really Simple SSL plugin handle it for you.